To update your IP clock to a Headline Clock, consider reading the user guide attached below, and then perform the following steps: - Update the firmware: Access the device by its IP address in your
web browser and update the 2 fields shown below on the Firmware page in the
device web server (under Device Settings), then reboot the device using the
"Reboot Now" link. The device will update and reboot again
automatically in 2-3 minutes. Do not interrupt power during this time.
- Reset to factory
defaults: Access the
device by its IP address in your web browser and click the "Reset to
factory defaults" link at the lower right on the Settings page.
- Reboot the device: Access the device by its IP address in
your web browser and click the "Reboot the clock" link at the
lower right of the Settings page.
- Update the sounds: The Headline clock chimes must be FTP'd onto
the device. Follow these steps:
- Save and extract the
below chimes.zip file on your PC
- Install a FTP client
on your PC, such as Filezilla, if you don't have one already. Watch out for
unwanted bundled software when installing Filezilla: https://filezilla-project.org/download.php
- Run your FTP client,
and connect to the device using the device's IP address as the FTP host
address, a username of "anonymous" and a password of
"SideDoor".
- Transfer the unzipped
"chimes" directory and its sub-directories and files to the root
directory of the device
- Configure if desired: Access the device by
its IP address in your web browser and select the desired chimes library in the
Settings page and apply the changes
|
 Updating...
Ċ Brian Donahoe, Oct 19, 2015, 12:56 PM
Brian Donahoe, Oct 19, 2015, 12:52 PM
|